TRAK-LOCK® LL GHOST RING SIGHT SET, 12GA, .735″ TRITIUM
Wilson Combat Trak-Lock II Ghost Ring Sight Set — 12 Gauge, .735″, Tritium Front
So you own a short-barrel Remington 870 with a .735″ bore and need a tritium ghost ring sight set specifically dimensioned for that configuration. The Wilson Combat Trak-Lock II — the number one choice of law enforcement worldwide. Fully CNC machined from bar stock steel. Tritium insert in the front sight for low light use. Both elevation and windage quickly and easily adjusted with a single hex head screw. 12 gauge, .735″ bore, tritium front with standard rear ghost ring. No firearms transfer required for the sight set itself. Ships directly across the UK and Europe.
The TRAK-LOCK® LL GHOST RING SIGHT SET, 12GA, .735″ TRITIUM gives you high speed sight acquisition and improved accuracy. Rugged sight set fully CNC machined from bar stock steel, featuring a tritium insert in the front sight for low light use. First, the .735″ specification confirms this set is dimensioned for the specific bore diameter of 14″ Remington 870 barrels used in tactical and law enforcement configurations. Next, the tritium front dot provides a constant self-illuminating aiming point — no batteries, no switches, no failure modes. Finally, the large rear ghost ring aperture naturally centres your eye on the front sight at speed — exactly what a close-range shotgun demands.
Available at eurogunandpartshub.com — for licensed shotgun owners across the UK and Europe.
Important barrel length note: The .735″ specification indicates this sight set is sized for 14″ barrel configurations. A 14″ barrel Remington 870 is a short-barrelled firearm in most jurisdictions — requiring Section 1 FAC in the UK and equivalent licensing across Europe. The sight set itself is a legal accessory that ships directly. Your specific shotgun configuration must comply with your country’s barrel length regulations.
Does This TRAK-LOCK® LL GHOST RING SIGHT SET, 12GA, .735″ TRITIUM Require Any Transfer Documentation?
No — sight accessory only, not a serialised component. So the Trak-Lock II sight set is a shotgun accessory — not a firearm under UK or European law. Therefore, it ships directly without RFD transfer or import documentation across the UK and Europe. However, your Remington 870 and its specific barrel length configuration must already comply with your country’s firearms licensing before installation.
What Does “.735″” Mean and Why Does It Matter?
The bore diameter specification for the TRAK-LOCK® LL GHOST RING SIGHT SET, 12GA, .735″ TRITIUM post fit. So the front sight post on the Trak-Lock II is machined to a specific inside diameter to fit over the barrel’s muzzle — different barrel diameters require different sight post dimensions. Also, the .735″ version is specifically for 14″ barrel configurations — confirming this sight set is designed for the shorter, tactical Remington 870 barrel length rather than the standard 18.5″+ field barrel. Therefore, confirm your specific barrel’s outside diameter at the muzzle before ordering — an incorrect diameter fit means the front sight will not seat correctly.
How Is This TRAK-LOCK® LL GHOST RING SIGHT SET, 12GA, .735″ TRITIUM Different From the Scattergun Technology TFM12?
Different manufacturer, same design — but different barrel diameter specification. So the Scattergun Technology TFM12 (previous listing) fits standard barrel diameters on the 870/1100/11-87. Also, this Wilson Combat version specifies .735″ — sizing it for shorter tactical barrel configurations. Therefore, if you own a standard-length 870 field barrel, the TFM12 is the correct choice. If you own a 14″ tactical or entry barrel, this Wilson Combat .735″ version is the correct choice.
What Does Installation Involve?
Same two-step process as all TRAK-LOCK® LL GHOST RING SIGHT SET, 12GA, .735″ TRITIUM models. So the front sight features a tritium insert and installs over the muzzle end of the barrel — epoxied in place over the factory front sight. Also, the rear ghost ring sight requires drilling and tapping the receiver for mounting screws. Therefore, a qualified gunsmith handles both steps — front sight epoxy is simpler than silver soldering, and the drill-and-tap rear mounting is standard receiver work for an experienced shotgun gunsmith.
Who Is This TRAK-LOCK® LL GHOST RING SIGHT SET, 12GA, .735″ TRITIUM Best For in the European Market?
This TRAK-LOCK® LL GHOST RING SIGHT SET, 12GA, .735″ TRITIUM fits Section 1 FAC holders in the UK and licensed short-barrel shotgun owners across permissive European jurisdictions who run 14″ Remington 870 tactical configurations and want tritium ghost ring sights that work in total darkness. So the Trak-Lock II is the number one choice of law enforcement worldwide — specifically including the short-barrel tactical configurations that this .735″ version serves. Also, European Section 5 licensed collectors who hold registered short-barrel 870 examples specifically need this dimension rather than the standard barrel sight set. Therefore, this sight serves a small but specific European market — licensed owners of short-barrel Remington 870 tactical configurations who want law enforcement-grade tritium sighting.
Specs Table
| Spec | Detail |
|---|---|
| Transfer Required | No — sight accessory, ships directly across UK and Europe |
| Bore Diameter | .735″ — for 14″ short-barrel tactical configurations |
| Compatibility | Remington 870 with .735″ bore diameter plain barrels — verify your barrel OD before ordering |
| Configuration | Tritium dot front sight + standard rear ghost ring (non-tritium) |
| Material | CNC machined bar stock steel |
| Front Sight | Self-illuminating tritium dot — no batteries required |
| Rear Sight | Large light-gathering ghost ring — standard non-tritium |
| Adjustment | Single hex head set-screw — windage and elevation |
| Tritium Life | Approximately 12-year half-life |
| Installation — Front | Epoxies over factory front sight |
| Installation — Rear | Drill and tap receiver — gunsmith recommended |
| Barrel Length Note | .735″ indicates 14″ barrel configuration — short-barrel firearms require appropriate licensing |
| Manufacturer | Wilson Combat / Scattergun Technology, USA — Mfr. No. SGTL2-TFM-12 |
| Best For | Short-barrel 870 tactical builds, Section 5 collectors, licensed tactical shotgun owners |
| EU Demand | 🟡 Moderate — specific to 14″ barrel configuration; smaller licensed market |
| Price | £269 |
FAQ
Does this sight set require any transfer documentation?
What does .735
How is this different from the TFM12?
Is a 14
Does the front sight require soldering?
Find more Wilson Combat and Scattergun Technology shotgun sights at eurogunandpartshub.com.
No transfer documentation required for this sight set. Short-barrel shotgun configurations require appropriate licensing in your country — verify before purchasing. All products sold in compliance with applicable UK and European firearms regulations. Euro Gun and Parts Hub — affiliated with BASC, GTA, and CIP.
Reviews
There are no reviews yet.