T-COMP COMPENSATOR FOR GLOCK GEN-3 BLACK W/BLACK SCREW

T-COMP COMPENSATOR FOR GLOCK GEN-3 BLACK W/BLACK SCREW

Tyrant CNC T-Comp Compensator — Glock Gen 3, 9mm, Black Body / Black Screw

So your Gen 3 Glock muzzle flips on every shot and you need a compensator that installs without set screws, without tools beyond the included wrench, and without permanent modification. The Tyrant CNC T-Comp dramatically reduces muzzle rise and sensed recoil, allowing much quicker target re-acquisition.7075 aluminium. Type III hardcoat anodised. 1.48 oz. 1/2″-28 thread. Two-piece design. No RFD transfer required. Ships directly across Europe for licensed Glock owners.

The real ingenuity is in how the T-COMP COMPENSATOR FOR GLOCK GEN-3 BLACK W/BLACK SCREW installs — a two-piece design that secures in seconds WITHOUT the need for set screws or any other faulty attachment methods.First, the T-Comp requires a 1/2″-28 threaded barrel — this is the standard thread pitch for 9mm Glock aftermarket barrels. Next, installation uses the included 16mm wrench — no gunsmith required. Finally, a Glock 19 with the T-Comp installed fits G34 holsters meaning you don’t need a special compensator-specific holster for most competition setups.

Available at eurogunandpartshub.com — for licensed Glock owners across the UK and Europe.

Does This T-COMP COMPENSATOR FOR GLOCK GEN-3 BLACK W/BLACK SCREW Require Any Transfer Documentation?

No — compensator accessory only, not a serialised component. So the T-Comp is a muzzle device — not a firearm or serialised component under UK or European law. Therefore, it ships directly to you without RFD transfer or import documentation across the UK and Europe. However, your Glock pistol and threaded barrel must already be legally held in your country before installing this compensator.

Does This T-COMP COMPENSATOR FOR GLOCK GEN-3 BLACK W/BLACK SCREW Require a Threaded Barrel?

Yes — a 1/2-28 threaded barrel is required. So the T-Comp is compatible with 1/2″-28 TPI threaded Glock barrels the standard thread pitch for aftermarket 9mm Glock barrels. Also, it works on standard 1/2-28 threaded barrels for 9mm and functions with most grain ammunition. Therefore, if you run a factory unthreaded barrel, you need to source a threaded aftermarket barrel before this compensator can be installed. Verify your barrel is threaded 1/2″-28 before purchasing.

What Glock Models Is ThisT-COMP COMPENSATOR FOR GLOCK GEN-3 BLACK W/BLACK SCREW  Compatible With?

Gen 3 through Gen 5 Glock with 1/2″-28 TPI — specifically G17, 17L, 19, 19X, 26 So this specific listing is the Gen 3 black body with black screw configuration. Also, Gen 5 Glocks use a special bullnose fitment confirm your specific generation before ordering as Gen 3 and Gen 5 T-Comp configurations may differ. Therefore, verify your exact Glock generation and model before purchasing.

How Does the Two-Piece Design Install?

Slide on, wrench tighten  no set screws. So the T-Comp installs securely in seconds without set screws or other attachment methods. Also, the package includes one T-Comp body, one T-Comp stem, one 16mm installation wrench, four rubber O-rings for the stem, and four thicker rubber O-rings for the barrel. Therefore, everything you need for installation is in the box — no additional hardware or tools required beyond what’s included.

Who Is This Compensator Best For in the European Market?

This T-COMP COMPENSATOR FOR GLOCK GEN-3 BLACK W/BLACK SCREW  fits licensed Glock owners in Czech Republic, Switzerland, Germany, France, and Austria who want a proven two-piece compensator design on their competition or range Glock without set screws or permanent modification. So the T-Comp is one of the most widely used Glock compensators in the US competition market, and that reputation translates directly to European IPSC and practical shooting where Glocks dominate the platform choices. Also, at £130 this is an accessible entry point for licensed European Glock owners who want measurable recoil reduction without the cost of premium compensator systems. Therefore, this is the correct compensator for any licensed European Gen 3 Glock owner who already runs a threaded barrel.

Specs Table

FAQ

Find more Tyrant CNC Glock compensators and handgun accessories at eurogunandpartshub.com.

No transfer documentation required. Glock ownership and threaded barrel must comply with your country’s licensing requirements. All products sold in compliance with applicable UK and European firearms regulations. Euro Gun and Parts Hub — affiliated with BASC, GTA, and CIP.