AMD 63 parts kit matching #s
Hungarian AMD-63 AK Parts Kit — Matching Numbers, 7.62x39mm
So you want a genuine Hungarian military parts kit with matching numbers — the complete AMD-63 demilled set that lets you build on the most distinctive Eastern Bloc AK variant ever produced. This is it. A genuine Hungarian AMD-63 AK parts kit with matching serial numbers on major components. 7.62x39mm. FEG factory production. No RFD transfer required — the kit ships directly. The receiver is not included.
The AMD 63 parts kit matching #s is not just another AK variant. First, the AK-63 was manufactured in Hungary by the FEG state weapons plant and used by the Hungarian Ground Forces as an infantry weapon — it replaced the more expensive AMD-65 in Hungarian military service. Next, the AMD-63 series was exported extensively to Eastern Europe, Africa, South America, and the Middle East during the Cold War making genuine Hungarian parts kits a documented collector piece with real military provenance. Finally, matching numbers on the bolt, bolt carrier, and front trunnion confirm these components came from the same original issued rifle.
Available at eurogunandpartshub.com — for AK collectors and builders across the UK and Europe.
Does This AMD 63 parts kit matching #s Kit Require RFD Transfer in the UK or Europe?
No a demilled parts kit is not a firearm. So no FFL is needed this is not a complete firearm. Therefore, it ships directly to you across the UK and Europe without RFD transfer or import documentation. However, the receiver the serialised firearm component is not included in this kit and must be sourced separately through your RFD. Therefore, plan your receiver sourcing before ordering the kit.
What Does “Matching Numbers” Mean on an AMD-63 Kit?
AMD 63 parts kit matching #s All major components carry the same serial number from the original issued rifle. So matching numbers on the AMD-63 kit means the bolt, bolt carrier, and trunnion all carry numbers confirming they came from the same original rifle. Also, gas tube and receiver cover may be matching on most kits but not guaranteed. Therefore, a matching numbers kit has significantly more collector value than a parts-assembled kit where components have been mixed from multiple rifles.
What Is the Original AMD 63 parts kit matching #s Barrel Length?
The original AMD-63 comes with a 14.5″ chrome-lined barrel and this matters legally. So 14.5″ is below the minimum rifle barrel length in most jurisdictions, including 16″ in the US and 24″ in the UK. Therefore, if you’re building this kit into a functional rifle, you must either replace the barrel with a compliant length barrel or — in the US — complete an NFA Form 1 for SBR registration before using the original 14.5″ barrel. Verify your country’s specific requirements before proceeding with any build.
What Receiver Does the AMD-63 Use?
AMD 63 parts kit matching #s A standard AKM-pattern stamped receiver. So the AK-63 was almost identical to the Soviet AKM rifle in receiver pattern this means a standard AKM-compatible stamped receiver works with this kit. However, the FEG “heavy wall” receiver is the original correct receiver for this kit and is the most desirable option for collectors who want period-correct configuration. Therefore, source an FEG heavy wall receiver or a quality AKM-compatible stamped receiver through your local RFD for a compliant build.
Who Is This AMD 63 parts kit matching #s Best For in the European Market?
This AMD 63 parts kit matching #s fits AK collectors and builders in Czech Republic, Germany, Poland, and other European countries where AK-pattern rifle ownership is legally permitted with appropriate licensing. So the AMD-63 is a genuinely distinctive collector piece it was almost identical to the Soviet AKM but manufactured by FEG in Hungary, giving it its own documented military service history separate from the more common Soviet-manufactured variants Also, these kits are rare — very few were ever offered in the US market, making European collector availability even more limited. Therefore, a matching numbers AMD-63 kit is a genuine collector find for any serious AK enthusiast.
Specs Table
| Spec | Detail |
|---|---|
| Transfer Required | No — demilled parts kit, no receiver included, ships directly |
| Calibre | 7.62x39mm |
| Manufacturer | FEG (Fegyver- és Gépgyár), Hungary — military production |
| Matching Numbers | Bolt, bolt carrier, front trunnion — gas tube and receiver cover may match (not guaranteed) |
| Original Barrel | 14.5″ chrome-lined (see barrel length legal warning below) |
| Barrel Legal Warning | 14.5″ is SBR length in most jurisdictions — US requires NFA Form 1; UK requires 24″ minimum for rifle; source compliant replacement barrel for legal builds |
| Receiver | NOT included — AKM-pattern stamped receiver required; FEG heavy wall receiver preferred |
| Condition | Military surplus — variable; inspect each component |
| Historical Service | Hungarian military and police service; Cold War export across Eastern Europe, Africa, South America |
| 922(r) | Required for US builds — source sufficient US-made compliance parts |
| Best For | AK collectors, matching kit builds, Hungarian AK enthusiasts |
| Price | £500 |
FAQ
Does this parts kit require RFD transfer in the UK?
What is the difference between the AMD-63 and AMD-65?
Is 14.5
What receiver do I need for this kit?
Are all major components matching numbers?
Is 922(r) compliance required for European builds?
What condition are the parts in?
Find more Hungarian AK parts kits and Eastern Bloc surplus at eurogunandpartshub.com.
No RFD transfer required for parts kit. Receiver must be sourced separately through local RFD. Original 14.5″ barrel is SBR length in most jurisdictions — verify your country’s barrel length requirements before building. All products sold in compliance with applicable UK and European firearms regulations. Euro Gun and Parts Hub — affiliated with BASC, GTA, and CIP.
Reviews
There are no reviews yet.