MAGWELL FOR GLOCK 43X/48®
Radian Weapons ANCHOR + MAGWELL — Glock 43X / G48, Gray
So your slim-line Glock 43X or G48 needs a magwell that locks on without movement, prevents magazine bind with extended magazines, and doesn’t require permanent frame modification. The Radian Weapons ANCHOR + MAGWELL delivers exactly that. Aircraft grade aluminium. Type III hardcoat anodised. Three-way lock system. No RFD transfer required. Ships directly across the UK and Europe.
This MAGWELL FOR GLOCK 43X/48® is a two-component system — not a single clip-on funnel. First, the ANCHOR goes in first: a tapered screw drives the PLANAR-LOK mechanism outward, causing barbed teeth to bite into the interior sidewalls of the frame, locking the ANCHOR into place. Next, the MAGWELL dovetails into the ANCHOR at the rear, with its own tooth biting into the front of the frame. Finally, the patented ANGLE-LOK detent drives the MAGWELL rearward into position, completing a three-way lock-up that is rock solid and completely reversible.
Available at eurogunandpartshub.com — for licensed Glock 43X and G48 owners across the UK and Europe.
Does This MAGWELL FOR GLOCK 43X/48® Require Any Transfer Documentation?
No — accessory component only, not a serialised part. So this is a frame accessory — not a firearm under UK or European law. Therefore, it ships directly without RFD transfer or import documentation. However, your Glock 43X or G48 must already be legally held under appropriate licensing in your country before installation.
How Does the Three-Way Lock System Work?
Three independent locking points — PLANAR-LOK, tooth bite, and ANGLE-LOK. So the PLANAR-LOK drives barbed teeth into the interior sidewalls of the frame when the anchor screw is tightened — this is the primary retention mechanism. Also, the MAGWELL’s tooth bites into the front of the frame as the dovetail engages the ANCHOR at the rear. Finally, the ANGLE-LOK detent drives the MAGWELL rearward under spring pressure, completing the lock. Therefore, the system locks from three directions simultaneously — no wobble, no shift, no movement under recoil.
Does This MAGWELL FOR GLOCK 43X/48®Prevent Magazine Bind?
Yes — that is the specific engineering problem it solves. So the PLANAR-LOK mechanism prevents inward wall flex of the frame when the magwell is installed. Also, inward wall flex under load is exactly what causes magazine bind — particularly with extended capacity magazines that add side pressure to the frame. Therefore, the PLANAR-LOK’s outward bite specifically counteracts that flex, keeping the magazine well open and consistent under all conditions.
What Glock Models Does This MAGWELL FOR GLOCK 43X/48® Fit?
Glock 43X and G48 only — not other Glock models. So the ANCHOR + MAGWELL system is specifically dimensioned for the slim-line 43X/48 frame. Also, it does not fit the G43 (shorter grip), the G19 (wider frame), or any other Glock model. Therefore, confirm your specific Glock model is either the 43X or the G48 before ordering.
Who Is This MAGWELL FOR GLOCK 43X/48® Best For in the European Market?
This MAGWELL FOR GLOCK 43X/48® fits licensed Glock 43X and G48 owners in Czech Republic, Switzerland, Germany, France, and Austria who carry or compete with the slim-line Glock platform and want faster, more consistent magazine changes. So the G43X and G48 are increasingly popular across European licensed carry and competition markets in permissive jurisdictions — the slim profile makes them practical where larger Glocks are not. Also, three colour options — gray (this listing), black, and bronze — allow visual customisation to match your build. Therefore, this magwell suits any serious European G43X or G48 owner who wants premium performance from their slim-line build.
Specs Table
| Spec | Detail |
|---|---|
| Transfer Required | No — accessory, ships directly across UK and Europe |
| Export Classification | US 0A501.y.1 — export compliance handled by Euro Gun and Parts Hub |
| Compatibility | Glock 43X and G48 ONLY |
| NOT Compatible With | G43, G19, or any other Glock model |
| System | ANCHOR + MAGWELL two-component system |
| Lock Mechanism | Three-way: PLANAR-LOK (barbed teeth), dovetail tooth bite, ANGLE-LOK detent |
| Frame Modification | No — fully reversible, no permanent modification |
| Magazine Bind Prevention | Yes — PLANAR-LOK prevents inward wall flex |
| Material | Aircraft grade aluminium |
| Finish | Hard Coat Anodized, Mil-A-8625F, Type III, Class 2 — Gray |
| Other Colours | Black (430114143, £169.90), Bronze (430114144, £179.90) |
| Included | ANCHOR, MAGWELL, anchor screw, 3/32″ allen key, retention stud & spring, retention stud tool |
| Delivery Weight | 0.091kg |
| Manufacturer | Radian Weapons, USA — Mfr. No. R0912 |
| Product No. | 430114145 |
| UPC | 810098421102 |
| Best For | G43X/G48 carry builds, competition builds, slim-line Glock upgrades |
| Price | £189 |
FAQ
Does this magwell require any transfer documentation?
Will this fit the standard G43?
Does installation permanently modify the frame?
What is PLANAR-LOK?
What colours are available?
Is the G48 the same frame as the 43X?
Is the Glock G48/43X legal in my European country?
Find more Radian Weapons Glock accessories and magwells at eurogunandpartshub.com.
No transfer documentation required. US export classification 0A501.y.1 — export compliance handled by Euro Gun and Parts Hub. Glock ownership must comply with your country’s licensing requirements. All products sold in compliance with applicable UK and European firearms regulations. Euro Gun and Parts Hub — affiliated with BASC, GTA, and CIP.
Reviews
There are no reviews yet.