GGP GLOCK SLIDE COMPLETION KITS

GGP GLOCK SLIDE COMPLETION KITS

Grey Ghost Precision GGP Glock Slide Completion Kit — 9mm, G17/G19/G26/G34 Gen 1-4

So you have an aftermarket Glock slide — GGP or OEM — and need a complete internal parts kit to finish it without sourcing each component separately. This kit does that. The Grey Ghost Precision GGP Slide Completion Kit for 9mm Glock slides. 17-4 PH stainless steel striker, extractor, extractor depressor plunger, and striker safety — all machined from bar stock. 6061-T6 aluminium back plate. Every spring and small part included. No firearms transfer required. Ships directly across the UK and Europe.

This GGP GLOCK SLIDE COMPLETION KITS is not a standard factory-spec parts kit. First, the four critical wear components — striker, extractor, extractor depressor plunger, and striker safety — are all upgraded to 17-4 PH stainless steel machined from bar stock, not cast or MIM. Next, the GGP aluminium back plate replaces the factory plastic cover plate with a machined 6061-T6 piece. Finally, every spring, bearing, liner, sleeve, spacer, and cup is included — you do not need to source anything separately to complete the slide.

Available at eurogunandpartshub.com — for licensed Glock builders across the UK and Europe.

Does This GGP GLOCK SLIDE COMPLETION KITS Require Any Transfer Documentation?

No — internal slide parts kit, not a serialised component. So this kit contains striker, extractor, springs, and associated hardware — none of which are serialised firearm components under UK or European law. Therefore, it ships directly to you without RFD transfer or import documentation. However, your Glock slide and frame must already be legally owned in your country before using these parts.

What Slides Is This GGP GLOCK SLIDE COMPLETION KITS Compatible With?

GGP-17/19 slides and Glock OEM Gen 1-4 in the listed models. So the kit is confirmed compatible with Grey Ghost Precision’s own GGP-17 and GGP-19 aftermarket slides. Also, it fits Glock OEM slides for the G17, G19, G26, and G34 in Gen 1 through Gen 4. Therefore, whether you are completing a GGP aftermarket slide build or upgrading the internals of a factory Glock OEM slide, this kit covers both applications.

Why 17-4 PH Stainless Steel Instead of Factory MIM Parts?

Dimensional consistency and material hardness. So factory Glock components use metal injection moulding (MIM) for some parts — a cost-effective process that can produce dimensional variation. Also, 17-4 PH stainless steel machined from bar stock produces tighter dimensional consistency and higher hardness than MIM parts. Therefore, builders who want the most reliable, consistent internal components for a high-round-count or competition build specifically choose bar stock stainless over factory MIM.

What Exactly Is Included in This GGP GLOCK SLIDE COMPLETION KITS ?

Twelve components — everything needed to complete the slide assembly. So the kit includes: 17-4 PH stainless steel striker; 17-4 PH stainless steel 9mm extractor; 17-4 PH stainless steel extractor depressor plunger; 17-4 PH stainless steel striker safety; GGP 6061-T6 aluminium back plate; 5.5 lb striker safety spring; extractor depressor plunger spring; striker safety spring; GGP striker channel liner; striker spacer sleeve; two striker spring cups; and extractor depressor plunger bearing. Therefore, nothing is missing — this is a complete slide internal kit.

Who Is This GGP GLOCK SLIDE COMPLETION KITS Best For in the European Market?

This GGP GLOCK SLIDE COMPLETION KITS  fits licensed Glock builders in Czech Republic, Switzerland, Germany, France, and Austria who are completing GGP aftermarket slides or upgrading OEM Glock slide internals on G17, G19, G26, or G34 platforms. So the GGP slide is increasingly popular among European Glock builders who want a machined aftermarket slide without the cost of a fully assembled complete upper. Also, European IPSC and practical shooting competitors who run high round counts on their Glocks will find the 17-4 PH stainless components a meaningful durability upgrade over factory parts. Therefore, this kit serves the growing European custom Glock build market directly.

Specs Table

FAQ

Find more Grey Ghost Precision Glock parts and slide completion kits at eurogunandpartshub.com.

No transfer documentation required. US export classification 0A501.x — export compliance handled by Euro Gun and Parts Hub. Glock ownership must comply with your country’s licensing requirements. All products sold in compliance with applicable UK and European firearms regulations. Euro Gun and Parts Hub — affiliated with BASC, GTA, and CIP.